The Dynatrol® Type CL-10RH liquid level probe and 102B control switch are used for application to either high or low point level detection of liquids and slurries. A unique vibrating principle permits design and operation features not available with other types of liquid level detectors.","VersatileThis level control is applicable to the level detection of a wide range of liquids and slurries. The detector may be mounted in any position on a vessel or in piping.","RuggedNo packing gland, diaphragm, float, bearing, bellows or other troublesome pressure seal is used in the Dynatrol level switch design. This unique design provides rugged construction yet a sensitive transmission of vibration energy through a rigid, all-welded pressure seal.","Corrosion resistant coatings are available if required for specific liquid level applications.","All components have been constructed for long operating-life and require no field adjustments.
技术参数
| 规格项 | 参数值 |
|---|---|
| 介质温度范围 | 0 to 750 F (-17.78 to 399 C) |
| 最大工作压力 | 1000 psi (704 m H2O) |
| 安装选项 | Side mount; Top mount; Bottom mount |
| 工作温度 | 25 to 300 F (-3.89 to 149 C) |
| 料位测量类型 | Point Level / Multi-Point Levels |
| 测量技术 | Vibrating or Tuning Fork Method |
| 介质 | Liquid |
| 输出选项 | Analog Voltage Signal |
| 产品类别 | Level Transmitters |
| 特征 | Sanitary Applications rated (3A etc.); Can handle liquids with suspended solids (slurries) ;Other |
若上述内容存在差异，请以产品手册为准。
如需获取样品、技术支持或完整规格书，请点击联系销售。
声明：本产品内容及配图源自互联网收集或平台用户自行上传，目的在于传递更多信息，并不代表本网赞同其观点或证实其内容真实性，不承担此类作品侵权行为的直接责任及连带责任。如涉及作品内容、版权等问题，请联系本网处理，侵权内容将在一周内下架整改。
