Inline style thermal mass flow meters include a flow section that is usually specified to match the user’s flow conduit and is then plumbed directly into the process line. This design has the sensing elements mounted directly in the flow section for exposure to the process gas. Our inline style thermal mass flow meters are available in sizes from 1\/4″ pipe through 4″ pipe or tube, and are provided with a variety of options such as MNPT ends, tube end fittings, butt weld ends, flanged end configurations, etc. as required. Pipe sizes in excess of 4″ typically require insertion style thermal mass flow meters.","Remote style thermal mass flow meters utilize two enclosures. One enclosure is mounted at the point of measurement on the flow section or on the probe assembly. This enclosure may be rated for either hazardous environments or for ordinary, non-hazardous environments, as necessary. The second (remote) enclosure is usually placed in a readily accessible location rated for non-hazardous conditions. (Contact the factory for information concerning remote explosion-proof enclosure). The remote enclosure includes the all of the electrical connections as well as the linearizing electronics and the display\/keypad assembly. Only a four-wire, twisted-pair cable is required to carry the input power and flow signal between the two enclosures.
技术参数
规格项 | 参数值 |
---|---|
接口选项 | Serial / Digital; Network / Fieldbus (optional feature) |
介质温度 | -40 to 392 F (-40 to 200 C) |
介质类型 | Gas |
电气输出 | Analog Current; Voltage |
终端配件 | In-line Threaded |
测量技术 | Thermal |
工作压力 | 500 psi (352 m H2O) |
工作温度 | -40 to 140 F (-40 to 60 C) |
仪表形式 | Mass Flow Meter |
安装 | In-line |
管道直径 | 0.25 to 4.00 inch (6.35 to 102 mm) |
产品类别 | Mass Flow Meters and Controllers |
审核认证 | ATEX; Canadian Standards Association; IECEx, KOSHA |
显示 | Digital |