特性

• 助听器
• 家用医疗设备
• 运动节能开关
• 无线传感器
• 运动激活计量装置
• 第iii类医用植入式
• 家庭医疗保健设备
• 移动式计量装置

Product Details","There is an ADXL362 variant called ADXL362-MI which is applicable to medical implantable and other Class III devices. The ADXL362 is an ultralow power, 3-axis MEMS accelerometer that consumes less than 2 µA at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode. Unlike accelerometers that use power duty cycling to achieve low power consumption, the ADXL362 does not alias input signals by undersampling; it samples the full bandwidth of the sensor at all data rates.","The ADXL362 always provides 12-bit output resolution; 8-bit formatted data is also provided for more efficient single-byte transfers when a lower resolution is sufficient. Measurement ranges of ±2 g, ±4 g, and ±8 g are available, with a resolution of 1 mg\/LSB on the ±2 g range. For applications where a noise level lower than the normal 550 µg\/√Hz of the ADXL362 is desired, either of two lower noise modes (down to 175 µg\/√Hz typical) can be selected at minimal increase in supply current.","In addition to its ultralow power consumption, the ADXL362 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and several activity detection modes including adjustable threshold sleep and wake-up operation that can run as low as 270 nA at a 6 Hz (approximate) measurement rate. A pin output is provided to directly control an external switch when activity is detected, if desired. In addition, the ADXL362 has provisions for external control of sampling time and\/or an external clock.","The ADXL362 operates on a wide 1.6 V to 3.5 V supply range, and can interface, if necessary, to a host operating on a separate, lower supply voltage. The ADXL362 is available in a 3 mm × 3.25 mm × 1.06 mm package.","Refer to the ADXL362-MI data sheet for information on ADXL362-MI. The ADXL362-MI is processed through a special, high reliability manufacturing flow involving additional process, test, and quality controls to meet the quality and reliability requirements of implantable and other Class III medical devices. For more information please contact Analog Devices Sales.","Applications

技术参数