"The LIN Series sensors are non-contact linear position sensors with one or two independent outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to a linear displacement of the actuator magnet.","The included actuator magnet is specifically paired to the sensor and is required to assure proper operation. Other magnets may yield less than optimal performance.","Features","Typical Applications"
特性
- Easy setup and robust monitoring with M4 screws
- Dual independent (redundant) outputs assure high reliability
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12) discrete wire leads or harness with connector
- RoHS compliant
- IP68*
- Compliant to industrial/automotive EMC/EMI/ESD directives
- Hydraulic valves
- Hydraulic controls
- Electric drives
- Pneumatic controls
- Zero-contact encoder alternative
- Gear selection / shifting position
技术参数
| 规格项 | 参数值 |
|---|---|
| 电气输出 | Voltage |
| 产品类别 | Hall Effect Position Sensors |
| 宽度 | 1.69 inch (42.93 mm) |
| 主体形状 | Rectangular |
| 电气连接 | 20 AWG 305 mm (12”) Discrete Wire Leads Or Harness With Connector |
| 长度 | 1.28 inch (32.51 mm) |
| 工作温度 | 284 F (140 C) |
| 精度 | 2 % |
| 电源要求 | DC Powered |
| 高度 | 0.2600 inch (6.6 mm) |
| 线性度 | 1 ±% Full Scale |
| 测量范围 | 1.77 inch (45 mm) |
