"For most non-voltage-producing devices located in a hazardous area, a single zener barrier that is negative-earth-grounded can be used for intrinsic safety.","Instrumentation that produces an output (signal conditioners) usually requires two barriers, one for each \"floating\" lead. In this case, select one of the 54800 Series dual channel barriers shown here.","Any non-voltage-producing sensor or switch is rendered intrinsically safe for hazardous locations when properly connected to the output of these Zener Barriers."
特性
- Intrinsic safety with solid-state reliability
- Since no explosion-proof enclosures are needed for sensor wiring, these units further provide economical installation
- With encapsulated construction, 54800 Series Barriers are impervious to dust and moisture
- Optional clip available for rail mounting
技术参数
| 规格项 | 参数值 |
|---|---|
| 宽度 | 4.75 inch (121 mm) |
| 工作温度 | -20 to 140 F (-29 to 60 C) |
| 产品类别 | Intrinsic Safety Barriers |
| 通道数 | 2 # |
| 交流或直流 | DC |
| 总无保护电容 | 5.6 microF |
| CSA 认证 | CSA |
| 高度 | 2.75 inch (69.85 mm) |
| 安全栅类型 | Zener Barrier |
| 最大内阻 | 275 ohms |
| UL 认证 | UL |
| 应用 | 4-20 mA 2-wire Transmitters; Switches; RTDs; Thermocouples; Strain Gages; Load Cells; Flow Meters; Level Sensors, Pressure Switches |
| 深度 | 6 inch (152 mm) |
| 总无保护电感 | 10 mH |
| 安装方案 | Earth-Grounded Rail Mount |
