Honeywell ABP Amplified Basic Pressure Sensors are piezoresistive silicon pressure sensors offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The ABP Series uses an on-board Application Specific Integrated Circuit (ASIC) to fully calibrate and temperature compensate for sensor offset, sensitivity, temperature effects and accuracy errors (including non-linearity, repeatability and hysteresis). Calibrated output values for pressure are updated at approximately 1kHz for analog and 2kHz for digital and are calibrated over the temperature range of 0ºC to 50ºC (32ºF to 122ºF). Honeywell ABP sensors are characterized for operation from a single power supply of either 3.3Vdc or 5.0Vdc and measure gage and differential pressures.
技术参数
| 规格项 | 参数值 |
|---|---|
| 安装风格 | Through Hole |
| 工厂包装数量 | 250 |
| 最大工作温度 | + 85 C |
| 商标 | Honeywell |
| 工作电源电压 | 5 V |
| 输出类型 | Analog |
| 工作电源电流 | 2.7 mA |
| 电源电压-最大 | 5.25 V |
| 产品类型 | Pressure Sensors |
| 说明 | 板载压力传感器 DIP,Wet Media,1 PSIG Ana, 10% to 90%, 5V |
| 端口大小 | 1.88 mm |
| 电源电压-最小 | 4.75 V |
| 工作压力 | 0 psi to 1 psi |
| 子类别 | Sensors |
| 最小工作温度 | - 40 C |
| 端口类型 | Dual Radial Barbless, Same Side |
| RoHS | Y |
| 系列 | ABP |
| 压力类型 | Gauge |
